Table Of Contents; Contents; Introduction; Features - Mackie iP-10 Owner's Manual

Contents

IMPORTANT SAFETY INSTRUCTIONS ........................ 2
CONTENTS .............................................................. 3
INTRODUCTION ...................................................... 3
FEATURES ............................................................... 3
HOW TO USE THIS MANUAL .................................... 4
GETTING STARTED ................................................... 4
THINGS TO REMEMBER ........................................... 4
HOOKUP DIAGRAMS............................................... 5
PLACEMENT ............................................................ 7
ROOM ACOUSTICS .................................................. 7
RIGGING ................................................................ 8
PROTECTION ........................................................ 10
AMPLIFIER POWER ............................................... 10
RECOMMENDED POWER RATINGS ......................... 10
PREVENTING LOUDSPEAKER DAMAGE ................... 10
APPENDIX A: SERVICE INFORMATION .................... 11
APPENDIX B: CONNECTIONS ................................. 12
APPENDIX C: SPECIFICATIONS AND DIMENSIONS ... 13
LIMITED WARRANTY ............................................. 15

Introduction

iP Series Install Performance Loudspeakers are
designed exclusively for a wide range of installed
sound reinforcement applications. Behind each
iP loudspeaker's clean, professional look are high-
output, custom-designed woofers and premium 1.4"
titanium diaphragm compression drivers delivering
rich, articulate full-bandwidth response. Ample rigging
points support vertical and horizontal rigging and a
choice of Neutrik or terminal connections provides
®
install flexibility. Optional ceiling and wall mounts are
available for aesthetically demanding venues. Plus,
the companion iP-18S 18" subwoofer is perfect for
additional low-frequency response and output in larger
applications. Add the SP260 speaker processor with iP
presets for quick setup and flawless sonic performance.
Like us
Follow us
Watch our dang videos

Features

iP Full-Range Models:
• Low-profile installation loudspeaker.
• High-output ceramic woofer with voice coil for
maximum output.
• iP-10 - 10" woofer / 2" voice coil
• iP-12 - 12" woofer / 2.5" voice coil
• iP-15 - 15" woofer / 2.5" voice coil
• 1.4" titanium compression driver provides smooth,
consistent high-frequency response.
• 8 × M10 rigging points and rotatable 90° × 50° horn
for vertical/horizontal rigging (PA-A2 accessory).
• Optional ceiling and wall mount accessories meet
the needs of the most aesthetically demanding
venues (iP-CM100 & iP-WM100 accessories).
• Rotatable center logo allows for clean presentation
in all configurations.
• Convenient terminal strip connectivity saves time
and cost.
• Dual Neutrik parallel connectors.
®
• Lightweight, compact and durable 15mm poplar
cabinet construction.
• Companion iP-18S 18" subwoofer extends
low-frequency response and increases output
in larger applications.
• Optional SP260 2 × 6 speaker processor delivers
iP presets to get your system quickly dialed in.
iP-18S Subwoofer:
• 18" high-output installation subwoofer.
• 18" high-output ceramic woofer with 3" voice coil
for maximum output.
• Convenient terminal strip connectivity saves
time and cost.
• Dual Neutrik parallel connectors.
®
• Lightweight, compact and durable 15mm poplar
cabinet construction.
• Optional SP260 2 × 6 speaker processor delivers
iP presets to get your system quickly dialed in.
Owner's Manual
3