Pioneer SC-25 Firmware Update Instructions page 2

Connect the LAN terminal on the Receiver to the LAN terminal on your router (with or without
the built-in DHCP server function) with a straight LAN cable CAT5 or higher.
Checking the Firmware
Use the Receiver's remote control for the following three steps:
A. Press HOME MEDIA GALLERY button to select 'Home Media Gallery' as the input function.
B. Select 'Setup' and press ENTER to confirm your selection.
The Setup screen appears.
C. Select 'Information' and press ENTER to confirm your selection.
The Firmware Version for the Home Media Gallery is displayed.
D. On the PC, please go to Pioneer's website to determine the latest firmware version available for the Receiver.
--If the firmware version displayed on the Receiver and displayed on Pioneer's website are the same, it is
NOT NECESSARY to update the Receiver. --If the firmware version displayed on the Receiver and
displayed on Pioneer's website are different, it is NECESSARY to update the Receiver. Please proceed to
the next step.
Updating the Firmware of the Receiver
**Use the PC for Step 1, and use the Receiver remote control for Steps 2 to 7.**
1. Using the PC, download the latest firmware file from Pioneer's website (URL is listed in step D above) and
save it to a folder on the PC. Please make a note of the location of the downloaded file for Step 12.
2. Press the HOME MEDIA GALLERY button on the Receiver's remote control to select 'Home Media
Gallery' as the input function.
3. Select 'Setup' and press the ENTER button to confirm your selection. The
Setup screen appears.
TV Screen