Usb Charging - Sharp Aquos Phone es WX04SH Online Manual

Remove micro USB plug from External Device Port

USB Charging

Use commercially available micro USB cable (hereafter "USB
cable").
Power on handset and PC first.
Handset may not charge or charge slowly depending on PC
status/environment.
Insert micro USB plug of USB cable into External
Device Port
Insert micro USB plug in correct orientation; otherwise, External Device
Port may be damaged. Confirm contours and orientation of micro USB
plug before inserting it.
Insert USB plug of USB cable into PC USB port
Notification Lamp illuminates while charging.
Notification Lamp goes out when charge is full.
Remove USB cable from handset and PC
WX04SH
Lithium-ion Battery
Handset requires a lithium-ion battery. Lithium-ion batteries are
recyclable. To recycle a used lithium-ion battery, take it to any shop
displaying the recycling symbol.
To avoid fire or electric shock, do not short-circuit or disassemble
Battery.
Charging Cautions
Handling Cables
Do not pull, bend, or twist cable.
USB Charging Caution
Handset may power on automatically when connected to a PC with
USB cable; avoid connection aboard aircraft or in hospitals, etc. where
handset use is prohibited.
Battery Care
To help maintain performance and life of Internal Battery, do not
store in the following conditions.
Full (immediately after charging is complete)
Exhausted (too low to power on handset)
Periods of Disuse
Charge at least once every 6 months; if left uncharged, handset may
become unusable or files/settings may be affected.
Bulges of Internal Battery
Depending on usage, bulges may appear near end of battery life; this
does not affect safety.
Internal Battery Replacement
Internal Battery is a consumable item; may need to be replaced if
operating time shortens noticeably. Internal Battery is not user
replaceable; its replacement incurs fees and requires handset
submission. For details, contact
Corporation Mobile Telecommunication Services Business Promotion
Center.
1-9
WILLCOM Service Center or Sharp