Emotiva XMC-1 Firmware Update Procedure page 4

Update Procedure:
• Download the Instructions and the Firmware Update file ZIP archive.
• Extract the firmware update file (one file) from the ZIP archive you downloaded.
• Copy the firmware update file onto a standard FAT32 formatted USB flash drive.
• Insert the USB drive into the USB port on the front or back of the XMC-1.
• Press the Menu button.
• Use the Up/Down buttons to select Setup; press the Right button to enter the Setup menu.
• Use the Up/Down buttons to select Advanced; press the Right button to enter the Advanced
Setup menu.
• Use the Up/Down buttons to select Firmware Update; press the Right button to enter the
confirmation screen.
• Use the Up button to confirm your choice; the confirmation box will change to "X".
• Use the Left button to confirm the update.
ONCE YOU PRESS THE LEFT BUTTON THE UPDATE WILL COMMENCE.
• During the update process the screen will display the names of the various firmware modules
being updated; for some modules, you will see a progress bar while the update is completed.
The entire update process will take approximately three to five minutes - or less.
• When the update process is complete, the XMC-1 will switch into Standby mode.
• Remove the USB drive containing the firmware update.
• When you turn the XMC-1 back on the update will be complete and your XMC-1 will be ready
to use.
Congratulations, you have just successfully updated the
firmware on your XMC-1. If you have any problems or
questions, please contact Emotiva Technical Support for
assistance.
Version 3.0
Official XMC-1 Firmware Update
Page 4 March 26, 2015