Table of Contents
Advertisement
Configuring the Home/Office Network
Click Settings in the "Network (Home/Office) Properties" screen to generate the
"Configure Network (Home/Office)" screen.
General
The top part of the Configure Network (Home/Office) screen displays general
communication parameters. Actiontec recommends not changing the default
values in this section unless familiar with networking concepts.
Status Displays the connection status of the network.
When should this rule occur? Displays when the rule is active. To schedule rules,
see the "Advanced Settings" chapter.
Network Select the type of connection being configured from the drop-down list
(options: Broadband Connection, Network [Home/Office], or DMZ).
Connection Type Displays the type of connection.
Physical Address Displays the physical address of the network card used for the
network.
MTU
Maximum Transmission Unit) specifies the largest packet size per-
MTU (
mitted for Internet transmission. "Automatic" sets the
es include "Automatic by
connection, and "Manual," which allows the
Chapter 4 Using Network Connections
," which sets the
DHCP
MTU
according to the
MTU
to be set manually.
MTU
25
at 1500. Other choic-
DHCP
Advertisement
Table of Contents
