Advertisement
maintain voltage longer in storage. However, the environment the batteries reside in for the 10 years can
deplete the power.
We suggest name brand Alkaline batteries for indoor displays.
A minimum voltage of 1.48V for each battery is necessary for proper performance.
Use batteries dated at least six years in advance of the current year. Batteries dated earlier than six
years from now may still work, but may be unstable in performance.
Good name brand batteries make less noise, which reduces the chance of RF (radio frequency)
interference from the battery compartment.
Multifunctional Wall Clock Factory Restart
Explanation: The factory restart returns the Multifunctional Wall Clock to an "out-of-the-box" state and
often resolves an issue.
Factory Restart:
1. Remove batteries from the wall clock.
2. Press one of the buttons on the wall clock at least 20 times to clear all memory.
3. Verify that the wall clock is blank before proceeding
4. Leave without power for 15 minutes (very important).
5. Insert fresh Alkaline batteries into the wall clock.
6. Do not press buttons for 15 minutes.
Atomic Wall Clock
12-Hour or 24-Hour Time Format
Display the time in 12-hour or 24-hour format
Default is 12-hour time
Use the
Program Menu
Supported Time Zones
This Multifunctional Wall Clock offers seven time zones:
AST=Atlantic
EST= Eastern
CST= Central
MST= Mountain
PST= Pacific
AKT= Alaska
HAT=Hawaiian
The Multifunctional Wall Clock works in North America. Outside of North America, the Multifunctional Wall
Clock will not receive a WWVB signal, but will keep time like a quartz clock.
Does the clock have a backlight?
No this clock does not have a backlight.
Time is off by hours
Check to see if the
Wall Clock has not received a WWVB time signal in the past 24 hours.
Reposition the Multifunctional Wall Clock with the front or back facing Colorado.
Check that the
Time Zone
Program
Menu.
Check that the DST indicator is correct for your location (most areas observe DST so this should be
ON). Adjust the DST indicator in the
Large buildings, metal roofed buildings and buildings or rooms full of electrical and/or radio equipment
make it difficult to receive the WWVB time signal.
La Crosse Technology, Ltd
to switch time formats
WWVB
Tower icon appears on the atomic wall clock. If not, the Multifunctional
selected correctly reflects your location. Adjust the time zone in the
Program Menu.
Page 2
Advertisement
