•
Table numbers and their corresponding operating frequencies
are provided in the tables on page 15.
•
A voice announcement will inform you of the selected Table number.
5 Press the PTT switch to save the setting and switch to the
QT/ DQT setting.
•
A beep will sound and the transceiver announces "QT".
6 Press the Up/Down key to select QT or DQT, then press the
PTT switch to confi rm the selection.
7 Press the Up/Down key to increment/ decrement the QT/
DQT number, to select the new value.
•
Press and hold the Up/Down key to continuously increment/
decrement the QT/ DQT number.
•
QT/ DQT numbers and their corresponding settings are
provided in the tables on pages 16 to 18.
•
A voice announcement will inform you of the selected QT/ DQT
number.
8 Press the PTT switch to save the setting.
•
A beep will sound and the transceiver announces "Channel
Number".
•
Repeat steps 3 to 8 to set up another channel.
9 Press and hold the PF-2 key and PTT switch to store the
settings and return to normal operation.
Note:
◆ This mode is effective when Voice Announcement is set in
English.
◆ The transceiver will automatically return to normal operation if
no action is performed for 20 seconds.
Table
Number
0
1
2
3
4
Frequency (MHz)
OFF
446.00625
446.01875
446.03125
446.04375
Table
Frequency (MHz)
Number
5
6
7
8
446.05625
446.06875
446.08125
446.09375
15