Table of Contents
Advertisement
Main Menu
Cooling System
FILLER NECK
6. M i x the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
With manual transmission:
3.6
(0.95 US gal, 0.79 Imp gal)
With automatic transmission:
(S)
3.5
(0.92 US gal, 0.77 Imp gal)
(Si)
3.8
(1.00 US gal, 0.84 Imp gal)
Maintenance
Table of Contents
BLEEDER BOLT
Fill up to here
7. Pour coolant into the radiator up
to the base of the filler neck.
8. Loosen the bleeder bolt on top of
the engine. Tighten it again
when coolant comes out in a
steady stream with no bubbles.
9. Refill the radiator to the base of
the filler neck. Put the cap on the
radiator, only tighten it to the
first stop. Start the engine and
let it run until it warms up (the
RESERVE TANK
radiator cooling fan comes on at
least twice).
10.Turn off the engine. Check the
level in the radiator, add coolant
if needed. Install the radiator cap,
tighten it fully.
11. Fill the reserve tank to the MAX
mark. Install the reserve tank
cap.
Hide quick links:
Advertisement
Table of Contents
