Main Menu
Lights
Replacing Rear Bulbs
1. Open the trunk and the taillight
assembly cover.
When replacing a bulb in the
right assembly, remove the jack
first.
2. Determine which of the four
bulbs is burned out: tail/stoplight,
back-up light, turn signal, or side
marker. Remove the socket for
that bulb by turning it counter-
clockwise.
Maintenance
Table of Contents
3. To remove the tail/stoplight bulb,
back-up light bulb or the turn
signal bulb, push it in slightly and
turn it counterclockwise. To
remove the side marker bulb,
pull it straight out of the socket.
4. Install the new bulb in the socket.
Insert the socket back in the
taillight assembly and turn it
clockwise to lock it in place.
5. Test the new bulb. Reinstall the
cover over the taillight assembly.