Fluke BP290 Instruction Sheet

Introduction
BP290 and BP291 are Li-ion battery packs for use in the Fluke 190
Series II ScopeMeter Test Tools, the Fluke 430-II Power Quality Test
Tools, and other portable Fluke test tools. Check the users manual of
your test tool for compatibility. Within the battery pack, a microcontroller
keeps record of the charge condition of the battery and an LED indicator
is provided that informs you about the actual charge condition. The
indicator has four LEDs and a test button.
The battery charges when installed in the test tool or with the external
charger EBC290. To replace the battery in your test tool, see the users
manual for the test tool.
These battery packs have been tested in accordance with and comply to:
•
UN Manual of Tests and Criteria Part III Subsection 38.3
(ST/SG/AC.10/11/Rev.5) – also known as the UN T19.T8 tests
•
IEC62133
•
DOT/IATA
Contacting Fluke
To contact Fluke, call one of the following telephone numbers:
•
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
•
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
•
Canada: 1-800-36-FLUKE (1-800-363-5853)
•
Europe: +31 402-675-200
•
Japan: +81-3-6714-3114
•
Singapore: +65-6799-5566
•
Anywhere in the world: +1-425-446-5500
PN 4707531
July 2015
2015 Fluke Corporation. All rights reserved.
Specifications are subject to change without
notice. All product names are trademarks of
their respective companies.
BP290/BP291
Li-ion Battery Pack
Instruction Sheet