Caution To prevent decrease of battery capacity, charge it at least twice a year. The battery pack, Fluke BP1730, has been tested in accordance with: UN Manual of Tests and Criteria Part III Subsection 38.3 (ST/SG/AC.10/11/Rev.3) – more commonly known as the UN T1..T8 –...
Page 2
Use the Product only as specified, or the protection supplied by the Product can be compromised. Carefully read all instructions. Charge the battery only when installed in the Fluke 1730 Energy Logger. Do not use the Product around explosive gas, vapor, or in damp or wet environments.
Page 3
A failed battery pack shall be properly disposed of in accordance with local regulations. Dispose of properly: do not dispose of the battery as unsorted municipal waste. Go to Fluke’s website for recycling information. Dispose in discharged condition and cover the battery terminals with isolation tape.
Page 4
Spent batteries should be disposed of by a qualified recycler or hazardous materials handler per local regulations. Contact your authorized Fluke Service Center for recycling information. This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed...
Page 5
LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.
Need help?
Do you have a question about the BP1730 and is the answer not in the manual?
Questions and answers