Turning The Led Pointer "On" Or "Off; Various Types Of Embroidery Frame Selections; Embroidery Frame Holders - Baby Lock Endurance II BND9-2 Instruction And Reference Manual Addendum

Turning the LED pointer
"ON" or "OFF"
1 Press .
2 Display page 4 of the settings screen.
3 Press to turn on the LED pointer to
check the needle drop point.
The key appears as

Various Types of Embroidery Frame Selections

Various types of embroidery frames can be used with this machine to suit your project by changing the

embroidery frame holders.

Embroidery frame holders
Two types of embroidery frame holders
(embroidery frame holder A and embroidery frame
holder B) are included with this machine.
Embroidery frame holder A is used with the four
included embroidery frames. Embroidery frame
holder B is used with the optional embroidery
frames. In addition, if optional embroidery frame
holder C is used, a frame from the optional round
frame series can be installed. For details on which
embroidery frame can be installed on each
embroidery frame holder, refer to "Embroidery
frame types and applications" listed in the
Instruction and Reference Guide.
1 Embroidery frame holder A
2 White corner covers
3 Embroidery frame holder B
4 Light gray corner covers
5 Magnet
6 Embroidery frame holder C (optional)
7 Dark gray corner covers
* Each touch of the key turns the setting either on or off.
when "ON" is
3
selected, and it appears as
"OFF" is selected.
when