Programs; Control Panel; Start/Stop Button; Options - Asko D3122 Use And Care Manual

OPERATING INSTR OPERA OPERA TING INSTRUCTIONS TING INSTR TING INSTR
OPERA OPERA TING INSTR
THE CONTR THE CONTR THE CONTR THE CONTROL P THE CONTR OL PANEL OL P OL P OL P
Your ASKO dishwasher has a button-operated control panel, as illustrated below. To select a wash program or option,
simply press the appropriate button. After you have selected the desired wash program and options, press Start/
Power button (on the top side of the control panel)
PR PR OGRAMS OGRAMS
PR

PROGRAMS

PR OGRAMS OGRAMS
To select a program, simply press the Program button until the indicator light behind the desired program glows. The
programs are described below:
Heavy Wash (160° F or 130° F)
For the heaviest soiled loads, such as pots, pans, casseroles, etc.
Normal Wash (130° F or 140° F)
For normally soiled loads, such as plates, glasses, bowls, and lightly
soiled pans.
Quick (85° F or 120° F)
For lightly soiled loads that are washed immediately after use. This
program is good for delicate items, such as fine china and crystal,
but you should set the temperature to low and dry the dishes without
heat.
Rinse and hold
To rinse dishes that you plan to wash later that day.
Program Times
The program times may not always be the same because of variations in the household hot water temperature. The
dishwasher heats the water to the proper temperature for the program selected; so if the temperature of the water
entering the dishwasher is too low, the dishwasher will run longer because it takes longer to heat the water. Raising
your water heater setting could help to shorten the cycle times.

OPTIONS

OPTIONS OPTIONS
OPTIONS OPTIONS
To select an option, simply press the appropriate option button. The options are described below.
Temperature
The dishwasher has two temperature options for each wash program, as shown above. When this button
is set on the high temperature, the main wash is heated to the higher temperature for the selected
program. If it is set to low, the main wash is heated to the lower temperature. The indicator light will glow
only when the high temperature is selected.
Drying
This option speeds up the drying process by raising the temperature in the final rinse to 160° F to heat
the dishes and tank before the drying cycle begins. The indicator light will glow only when this option is
activated.
PO PO POWER BUTT PO PO WER BUTT WER BUTTON WER BUTT WER BUTT
Use this button to turn the main power to the unit
on and off. The location of the power button is
illustrated above.
UCTIONS UCTIONS UCTIONS
UCTIONS
ANEL ANEL ANEL ANEL
ON ON ON ON
Program button
Program indicator
lights
Temperature
button
"The Normal Wash program is
used for energy testing and
should be used for normal or
lightly soiled loads. When
washing dishes that are more
heavily soiled, use a longer
program with higher
temperatures such as Heavy
Wash."
ST ST ST STAR ST AR AR AR ART/ST T/ST T/ST T/STOP BUTT T/ST OP BUTT OP BUTT OP BUTT OP BUTTON
Once you have selected the wash program and
temperature and drying options, press this button to
start the dishwasher. (Make sure the door is securely
closed.) The indicator light around the button will glow
progressively as the program goes through each cycle.
When the program is complete, the lights will glow all
the way around the button.
.
Stop

Start/Stop button

Drying
Program
button
progression
indicator lights
ON ON ON ON
Page 7