Charging The Sportscam - Swann SportsCam SW-DVR460 Operating Instructions Manual

Charging the SportsCam

Charging the built-in battery:
You can charge the battery via the USB slot on the base of the camera
using the supplied power adapter, or using a computer's USB port
and the supplied USB adapter or cable.
Charging the battery will take approximately 60 ~ 80 minutes.
Only connect the SportsCam to a standard USB 1.0, 1.1 or 2.0 port.
Under no circumstances ever connect the SportsCam to any power
source supplying anything other than 5V (this is the standard USB
power supply).
Some newer modifications of the USB port (such as USB 3.0 or
eSATAp ports) will accept the USB shaped plug, but supply different
amounts of power. Avoid connecting the SportsCam to these ports,
as results will vary, and doing so could damage the SportsCam.
To charge via a computer's USB
port:
• Insert the micro-USB plug on
the USB adapter or USB cable
into the USB socket on the
base of the SportsCam.
• Connect one end of the USB
adapter or cable to the USB
port on the computer.
Whilst charging, the red LED on the SportsCam will flash slowly.
When charging is complete, the red LED will stay on constantly.
9