Charging The Sports Hd Bulletcam - Swann Sports HD BulletCam Manual

Table of Contents

Advertisement

Charging the Sports HD BulletCam

You can charge the battery via the USB slot on the base of the camera
using a USB cable from a PC or stand-alone USB power supply.
Charging the battery will take approximately 60 ~ 80 minutes.
Only connect the Sports HD BulletCam to a standard USB 1.0, 1.1 or
2.0 port.
Under no circumstances ever connect the Sports HD BulletCam to any
power source supplying anything other than 5V (this is the standard
USB power supply).
Some newer modifications of the USB port (such as USB 3.0 or
eSATAp ports) will accept the USB shaped plug, but supply different
amounts of power. Avoid connecting the Sports HD BulletCam to
these ports, as results will vary, and doing so could damage the
Sports HD BulletCam.
Even if not actively used, you should charge the Sports HD BulletCam
at least once every three months - this keeps the battery "healthy".
To charge via a
computer's USB port:
• Insert the micro-USB plug on
the USB cable into the USB
socket on the rear of the Sports
HD BulletCam.
• Connect one end of the USB
adapter or cable to the USB
port on the computer.
Whilst charging, the red LED on the Sports HD BulletCam will flash slowly.
When charging is complete, the red LED will stay on constantly.
Charging the built-in battery:
9

Advertisement

Table of Contents
loading

Table of Contents