Advertisement
English
Please read these use instructions carefully before use and keep
them for future reference.
Important
• Plug your appliance into an alternating current outlet only and
make sure that your household voltage corresponds to the
voltage printed on the appliance.
•
This appliance must never be used near water (e.g. a filled
wash basin, bathtub or shower). Do not allow the
appliance to get wet.
• For additional protection, it is advisable to install a residual
current device (RCD) with a rated residual operating current
not exceeding 30 mA in the electrical circuit of your bathroom.
Ask your installer for advice.
• This appliance is not intended for use by children or persons
with reduced physical or mental capabilities, unless they are
given supervision by a person responsible for their safety. In
general, we recommend that you keep the appliance out of
reach of children.
• Avoid touching the hot parts of the appliance.
• When hot, do not place on surfaces that are not heat-resistant.
• Do not wrap the mains cord around the appliance. Regularly
check the mains cord for wear or damage. If the cord is dam-
aged, stop using the appliance and take it to an authorized
Braun Service Centre. Unqualified repair work can lead to
extreme hazards for the user.
• The appliance should be used on dry hair only.
• • Be careful when using the appliance at maximum temperature.
Be careful when using the appliance at maximum temperature.
Description
1 Cool touch
2 Display
3 Temperature selection buttons ( – / + )
4 «200 °C» button (for instant high-temperature styling)
5 Satin ions button
6 on/off button
7 Swivel cord (2 m length)
8 Green ion jets
9 NanoGlide Styling plates
IONTEC
IONTEC is a technology which is specifically developed to
protect the health of your hair. It restores the moisture balance of
your hair that usually gets lost during styling with excessive heat.
By activating the satin ions button (5), the green ion jets (8)
release millions of ions effectively on to your hair. These satin
ions envelop every single hair and quickly restore the moisture
balance of your hair by attracting moisture particles from the air
while straightening. The display now shows «satin ions» [C] and
a slight crackling noise can be heard.
Getting started
• Connect the appliance to an electrical outlet and push the
on/off button (6) for 1 second to turn it on.
• During heat-up, the display turns red. The appliance is
delivered with a default temperature setting of 160 °C. The
thermometer symbol is flashing as long as the displayed
temperature is not reached. [A]
• After approx. 30 seconds, the display turns green indicating
that the minimum styling temperature is reached. You can start
using the appliance.
• As soon as the preset temperature is reached, the thermometer
symbol stops flashing [B].
• Individual temperature choice: Using the temperature selection
buttons (3), you can adjust the temperature in 5 °C steps in a
range between 130 °C and 200 °C. We recommend the
following temperature settings:
8
Advertisement
