Fujitsu ScanSnap S510M Cleaning Instructions page 2

Fujitsu Europe LImited
Turn the Scanner
To rotate the Feed and Eject Rollers, press the POWER button while holding down the
SCAN button.
As a guideline, six presses of the POWER button make the rollers rotate one full turn.
Feed Rollers x 2
5
Clean lightly taking care not to roughen the surface.
Eject Rollers x 2
6
Clean lightly taking care not to roughen the surface
For further information please refer to the
ScanSnap S510M Image Scanner Operators Guide
1
Pad Assy
4
Plastic
Rollers
6
Eject Rollers
ON while cleaning the following locations
Using cleaning paper moistened with F1 Cleaner
While holding down the SCAN button
Press the POWER button
Rollers will rotate
which can be found on our Website:
www.fel.fujitsu.com/scanner
Cleaning Instructions for ScanSnap S510M
3
Pick Roller
5
Feed Rollers
2
Glass
2
.
1
July 2007