Related Manuals for Skyfood PCI-22 G
Summary of Contents for Skyfood PCI-22 G
- Page 1 Instruction Manual CAUTION! HAZARDOUS MOVING PARTS Disconnect Power Before Cleaning or Servicing Meat Grinder Models PCI-22 G 16967.6 - July/2003...
- Page 2 7 CLEANING To do the cleaning proceed as follows - Turn off the machine and disconnect it from power source. - Remove the pusher No.01 and the tray No. 04 (Picture -01) - Remove the Locking Ring No. 03 (Picture - 01), turning it clockwise, and then remove the internal components of the barrel, pulling them out.
-
Page 3: Technical Data
6 OPERATION Start the machine. The PCI-22 G meat grinder works very fast, therefore they require a fast feeding too. Put the meat lumps on the tray and using the stomper No. 01 (Picture - 01) push the meat into the feed throat where they will be sucked in by the worm. Feed meat at a constant rate for better grinding. - Page 4 The machine consist of an electrical motor that through a gear box operates a worm. The The meat grinder PCI-22 G must be installed on a level, non-skid surface with a maximum worm feeds the meat to the knife and hole plate. Several types of hole plates are available.
Need help?
Do you have a question about the PCI-22 G and is the answer not in the manual?
Questions and answers