Ford Mustang 2016 Owner's Manual page 268

E176084
Note: Jack at the specified locations to
avoid damage to the vehicle.
8. The vehicle jacking points are shown
here, and can be identified by the
triangle markings on the vehicle. Details
are depicted on the warning label on
the jack.
E174939
9. Place the jack at the jacking point next
to the tire you are changing. Turn the
jack handle clockwise until the wheel
is completely off the ground.
10. Remove the lug nuts with the lug
wrench.
Mustang (CZG) Canada/United States of America, Vehicles Built From: 13-07-2015, enUSA, First Printing
Wheels and Tires
11.
12.
E75442
13.
14.
265
I n f o r ma t i o n P r o v i d e d b y :
Replace the flat tire with the spare
tire, making sure the valve stem is
facing outward. Reinstall lug nuts
until the wheel is snug against the
hub. Do not fully tighten the lug nuts
until the wheel has been lowered. If
you are using the temporary tire, the
lug nut washers will not appear to be
flush with the rim. This is normal only
when using the temporary spare tire.
Lower the wheel by turning the jack
handle counterclockwise.
1
3
5
Remove the jack and fully tighten the
lug nuts in the order shown. See
Technical Specifications (page
267).
To store the folded wrench on the
jack, engage the bracket of the jack
base on the wrench feature as shown.
Swing the wrench upwards and
adjust the height of the jack until the
pin engages the hole. Tighten the hex
nut clockwise by hand until secure.
4
2