Electronic Vehicle Information Center (Evic) - Premium (4 Button); Compass Calibration - Dodge 2014 DART User Manual

ELECTRONICS
ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) —
PREMIUM (4 BUTTON)
• The EVIC features a driver interactive dis-
play that is located in the instrument
cluster. Pressing the controls on the left
side of the steering wheel allows the
driver to select vehicle information and
Personal Settings. For additional infor-
mation, refer to "Programmable Fea-
tures" in this guide.
• Press and release the UP
scroll upward through the main menus
(Fuel Economy, Vehicle Info, Tire PSI,
Cruise, Messages, Trip Info, Vehicle Speed
and Turn Menu Off) and sub menus.
• Press and release the DOWN
to scroll downward through the main
menus and sub menus.
• Press and release the RIGHT
for access to main menus, sub menus or
to select a personal setting in the setup
menu. Press and hold the RIGHT
• Press the LEFT

Compass Calibration

This compass is self-calibrating, which eliminates the need to set the compass manually.
When the vehicle is new, the compass may appear erratic and the EVIC will display "CAL"
until the compass is calibrated.
You may also calibrate the compass by completing one or more 360 degree turns (in an area
free from large metal or metallic objects) until the "CAL" message displayed in the EVIC
turns off. The compass will now function normally.
Programmable Features
• The EVIC can be used to view or change the following settings. Press the UP
button until System Setup displays, then press the RIGHT
the settings using the UP or DOWN buttons. Press the RIGHT
setting. Press the LEFT
• Radio Info
• Fuel Economy Info
• Cruise Control Info
• Digital Vehicle Speed
• Analog Vehicle Speed
74
button to
button
button
button for two seconds to reset features
button to scroll back to a previous menu or sub menu.
button to scroll back to a previous menu or sub menu.
Four Button EVIC Controls
• Trip Info
• Tire Pressure
• Vehicle Info
• Stored Warning Messages
• Turn Menu OFF
or DOWN
button. Scroll through
button to change the