2-1. VIEWING SERVICE ADJUSTMENT DATA
There are no adjustments necessary for these models. All data has
been set for optimal viewing for our customers. The following sections
are for informational purposes only.
2-2. ACCESSING SERVICE MODE
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
Channel 5
DISPLAY
DISPLAY
DISPLAY
WIDE
5
VOLUME+
RM-YD028
KDL-52S5100/52V5100
SECTION 2: SERVICE ADJUSTMENTS
Volume +
POWER .
TV POWER
CC
POWER
INPUT
Onscreen cursor
and select button
TOOLS
JUMP
The
logo displays momentarily, then the Service Mode
list displays.
Service/ADC Auto Calibration
Version: ER2.6-C121 DTT: S255.P033.S077
Model: 52V5100
Serial : 8000016
Power on Time: 00000H
Diagnostic and Serial Update
ADC Auto Calibration
Clone User Setting
Direct Log to USB
Factory Default
Change
RETURN
2-2-1. ENTERING THE SERIAL NUMBER
AFTER CHANGING THE MAIN BOARD
Use the following instructions to re-enter the Serial Number of the TV
after replacing the Main (BM3) Board.
1. After accessing service mode, press
list.
Service Mode/Product Information
Version: ER2.6-C121 DTT: S255.P033.S077
Model: 52V5100
Power on Time: 00000H
Serial : 8000016
Diagnostic Information
2-MAIN POWER:
3-DC ALERT1:
4-TCON:
5-HDMI:
6-Backlight:
7-TEMP:
8-HFR:
101-WDT:
Change
RETURN
2. To change the serial number fi eld, press
keys on the remote enter the Serial Number of the TV.
3. To save the Serial Number, press
4. To exit Service Mode, press
KDL-52S5100/52V5100
Back
Exit
to display the Self Diagnostic
1
0
0
0
0
0
0
0
Back
Exit
then using the number
.
.
48