Certa CT180ARCMPA Quick Start Manual

Do not disassemble. Do not attempt repairs or modifications. Your warranty will
•
be void if this instruction is ignored.
Do not use this product in an area where it can fall or be pulled into water or
•
other liquids.
The base tray is fitted to place a barrier between the compressor and sandy or
•
dusty ground, plus provide a stable operating platform, therefore keep the tray
clean at all times during use.
Use this compressor with 12V DC power only.
•
This product should never be left unattended during use.
•
This compressor becomes VERY hot during use and will remain so after use. Do
•
not touch any part of this compressor with bare hands, other than the ON/OFF
switch.
Never allow children to operate the compressor. Close supervision is necessary
•
when this compressor is being used near children or animals.
Do not pump anything other than atmospheric air.
•
Do not use any other tools or attachments without first determining the
•
maximum air pressure for that tool or attachment.
The air compressor is equipped with an automatic reset thermal protector and
•
can automatically restart after the thermal protector resets. Always turn the
power off when the thermal protector activates.
Exercise extreme caution and never exceed 30kph when driving with deflated
•
tyres.
Never make sharp turns while driving with reduced tyre pressure, as you could
•
break the bead between the wheel rim and the tyre.
Re-inflate tyres to the manufacturers recommended tyre pressure before high
•
speed travelling on roadways.
Please read and follow the operating instructions carefully to ensure you will get the
best results and longest service life expected from the air compressor.
Always operate the compressor within its maximum pressure rating. Refer to the
•
Specifications section of this manual for details. Operations exceeding the
maximum pressure rating will result in damage to the air compressor and void
the warranty.
Always observe the maximum duty cycle of the air compressor. Exceeding the
•
maximum duty cycle will result in damage to the compressor.
Your compressor is equipped with an automatic thermal overload protector. This
•
feature is designed to protect the air compressor from over-heating and causing
permanent damage to the compressor. The thermal overload protector will