Certa CT150ARCMPA Quick Start Manual

Do not disassemble. Do not attempt repairs or modifications. Your warranty will be void
•
if this instruction is ignored.
Do not use this product in an area where it can fall or be pulled into water or other
•
liquids.
The base tray is fitted to place a barrier between the compressor and sandy or dusty
•
ground, plus provide a stable operating platform, therefore keep the tray clean at all
times during use.
Use this compressor with 12V DC power only.
•
This product should never be left unattended during use.
•
This compressor becomes VERY hot during use and will remain so after use. Do not
•
touch any part of this compressor with bare hands, other than the ON/OFF switch.
Never allow children to operate the compressor. Close supervision is necessary when this
•
compressor is being used near children or animals.
Do not pump anything other than atmospheric air.
•
Do not use any other tools or attachments without first determining the maximum air
•
pressure for that tool or attachment.
The air compressor is equipped with an automatic reset thermal protector and can
•
automatically restart after the thermal protector resets. Always turn the power off when
the thermal protector activates.
Exercise extreme caution and never exceed 30kph when driving with deflated tyres.
•
Never make sharp turns while driving with reduced tyre pressure, as you could break the
•
bead between the wheel rim and the tyre.
Re-inflate tyres to the manufacturers recommended tyre pressure before high speed
•
travelling on roadways.
The air compressor comes originally packed without the air filter unit fitted.
1. Screw in the air filter unit and hand tighten. Do not use teflon tape or lubricants on the
thread.
2. Snap off the top lid to check if the element is correctly in place.
Please read and follow the operating instructions carefully to ensure you will get the best results
and longest service life expected from the air compressor.
Always operate the compressor within its maximum pressure rating. Refer to the
•
specifications section of this manual for details. Operations exceeding the maximum
pressure rating will result in damage to the air compressor and void the warranty.
Your compressor is equipped with an automatic thermal overload protector. This feature
•
is designed to protect the air compressor from over-heating and causing permanent
damage to the compressor. The thermal overload protector will automatically cut off
power to the air compressor if internal operating temperatures rise above save levels
during use.