Dell PowerVault MD3200 Deployment Manual page 31

NOTE:
Before configuring the storage array, check the status icons on the Device pane
to ensure that the enclosures in the storage array are in an Optimal status. For more
information on the status icons, see the Owner's Manual at support.dell.com/manuals.
Table 4-1. Initial Setup Tasks Dialog Box
Task
Rename the storage array
Set a storage array password
Set up alert notifications
Set up e-mail alerts
Set up SNMP alerts
Configure a storage array
Purpose
To provide a more meaningful name than the
software-assigned label, Unnamed.
To restrict unauthorized access. PowerVault
MDSM may ask for a password before
changing the configuration or performing a
destructive operation.
To notify individuals (by e-mail) and/or
storage enterprise management consoles, such
as Dell Management Console, (by SNMP)
when a storage array component degrades or
fails, or an adverse environmental condition
occurs.
To create virtual disks and map them to hosts.
Post Installation Tasks
31