Safety Instructions It is absolutely essential that you read these safety instructions carefully before connecting and using this K+H product. Your safety depends on it. Failure to follow these instructions voids the warranty. To ensure safe operation for years to come, keep these instructions in a safe place for future reference. K+H has manufactured this product in accordance with IEC 92 (SEC) 39 standards, then tested and delivered it in safe operating condition.
Termination Setting .................................5 Control and Monitoring..............................5 Monitoring with a PC...............................6 Category 5 Cable Color Code............................6 Frequently Asked Questions (FAQ) ..........................6 CE Declaration of Conformity ............................7 Compatible Accessories..............................7 K8-AESI16 Technical Specifications ..........................8 Electrical ..................................8 Mechanical..................................8 K8 Rackmount Family User Manual Page 3...
The audio signal travels in one direction only, from the input device to the output device. Control data is bi-directional. The K8-AESI16 is a K8 input device allowing either 8 or 16 audio channels (4 or 8 AES3 signals) to be placed onto the K8 bus.
9-16 and 8 analogue inputs on channels 1-8 are obtained by stacking a K8-AESI16 with a K8-AI8. The 4 CONFIG DIP switch on the K8-AESI16 is used to turn off transmission of channels 9-16, making it function like any other 8 channel K8 input device.
A limited amount of serial data tunnelling is available between the serial ports on any two devices in the system. This is useful for passing control data to another system, such as a lighting controller or external relay box located in the same equipment area as the K8 output box.
How do I control K8 devices? The K8 system is a single cable solution for both audio and control. A K+H terminal protocol is available for connecting a PC. The control system protocol is also openly published for use with Stardraw, AMX, Crestron and other control systems. Do K8 devices need to have addresses assigned to them? No, it is not required to make address assignments to K8 devices.
Sicherheitshinweise Das Gerät wurde von K+H gemäß IEC 92 (sec) 39 gebaut und hat unser Werk in einem sicherheitstechnisch einwandfreien Zustand verlassen. Um diesen Zustand zu erhalten und einen gefahrlosen Betrieb sicherzustellen, muss der Anwender die Hinweise und Warnvermerke beachten, die in der Bedienungsanleitung enthalten sind. Das Gerät entspricht der Schutzklasse I (schutzgeerdet).
Page 10
Inhalt Sicherheitshinweise ................................9 Übersicht K8 Produktfamilie............................11 Schnellstart ...................................11 Beschreibunng K8-AESI16 ............................11 Beschreibung Rückseite ...............................11 Beschreibung Bedienteil ...............................11 Kaskadieren von Eingangsgeräten ..........................12 Einstellen der Terminierung ............................12 Steuerung und Fernüberwachung ..........................12 Überwachung mit Hilfe eines PC ..........................12 Category 5 Kabel Farbkodierung ..........................13 Häufig gestellte Fragen (FAQ) ............................13...
Steuerdaten über ein CAT5-Kabel. Die Audiodaten werden dabei in eine Richtung übertragen, die Steuerdaten sind bidirektional. Ein K8-AESI16 ist eine K8 Eingabekomponente, die ermöglicht, entweder 8 oder 16 Audiokanäle (4 beziehungsweise 8 AES3) auf einem K8 Bus zu platzieren.
Anschlüssen K8 Out1 der ersten Einheit und K8 Out2 der zweiten Einheit verbunden. Der Anschluss K8 Out2 der zweiten Einheit ist damit der gemeinsame Ausgang beider Komponenten zum K8 Bus. K8-AESI16 AES3 Input K8-AI8 Analog Input Haupt -...
Zieladresse eingestellt werden. Im Auslieferzustand sind alle Geräte mit einer reservierten Adresse eingestellt, die mittels einer PC Verbindung geändert werden kann. Dies stellt sicher, dass es keine Konflikte beim ersten Zusammenstellen der Geräte gibt. Außerdem können den Geräten zu jedem Zeitpunkt einprägsame Namen zugewiesen werden. K8-AESI16 Bedienungsanleitung Seite...
Kompatibles Zubehör K8-485 USB zu RS-485 Adapterkabel zum Anschluss eines PCs zur Konfiguration. K8-*** Eine stetig wachsende Vielzahl an Ein- und Ausgangsgeräten für das K8 System. K8-RMK Rackeinbauwanne zur Aufnahme von zwei Halb-19“-Geräten K8-FMK Haltewinkelsatz für Untertischmontage Seite 14 K8-AESI16 Bedienungsanleitung...
Need help?
Do you have a question about the K8-AESI16 and is the answer not in the manual?
Questions and answers