Related Manuals for Masport LS4T-52
Summary of Contents for Masport LS4T-52
- Page 1 Electric Log Splitters 4 TON. LS4T-52 / 5 TON. LS5T-52 OWNER’S MANUAL Please read these instructions carefully before assembly. Keep the instructions in a safe place for future use. www.masport.com Part N : 556964...
-
Page 2: Table Of Contents
Do not operate this machine before it has been Proper Use assembled correctly and you have read and understood these instructions. For safety reasons, the Log Splitters are not to be used by children, young people, or any other persons who are not acquainted with These instructions are intended as a general these directions for use. -
Page 3: Application Conditions
the ground for operations. This is awkward operating position that the operator has to bring his face close to the machine, and thus PROTECT THE ENVIRONMENT risks being struck by wood chips or debris. Take used oil to an authorised collection point or follow the stipulations in the country where the log splitter is used. -
Page 4: Assembly
1. Oil Tank– 5 Ton Assembly 1A. Oil Tank– 4 Ton 2. Log Pusher 3. Work Table 1. Bolt the Support Leg to the Log Splitter, lift the log splitter 4. Wedge by the handles at both ends and place it on a 60 - 75cm 5. -
Page 5: Wiring Diagram
WIRING DIAGRAM A trigger type lock-out device is adopted to avoid accidental Hydraulic Control Lever pushdown. To operate the Hydraulic PLUMBING DIAGRAM Control Lever, draw the Trigger backward with the index finger before pushing the Hydraulic Control Lever forward. Warning! Never force the log splitter for more than 5 seconds by keeping pressure on it to split excessively hard wood. -
Page 6: Freeing A Jammed Log
Freeing A Jammed Log • Release both controls. • After the log pusher moves back and completely stops at its starting position, insert a wedge wood under the jammed log. • Start the log splitter to push the wedge wood to go completely under the jammed one. -
Page 7: Troubleshooting
Oil Drain Bolt with Dipstick is not tight. Tighten the Oil Drain Bolt with Dipstick. Hydraulic Control Valve Assembly and / or seal(s) Contact the dealer. worn. Specifications Model Number LS4T-52 LS5T-52 Motor - All 230V~ 50Hz 1500W IP54 Diameter * 5 ~ 25cm Log Capacity... - Page 8 Head Office - New Zealand 1-37 Mt Wellington Highway. Panmure, P.O. Box 14 349 Auckland 1060, New Zealand...
Need help?
Do you have a question about the LS4T-52 and is the answer not in the manual?
Questions and answers