Kia Soul Owner's Manual page 522

Maintenance
Tail light and side marker, Turn
signal light and Stop and tail light
■ Type A
Tail and side maker
Tail
Tail and stop
■ Type B
4. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
7 92
5. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket.
6. Insert a new bulb by inserting it
into the socket and rotating it until
Turn signal
it locks into place.
7. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly and
turning the socket clockwise.
OPS073032
8. Reinstall the light assembly to the
body of the vehicle.
Turn
signal
OPS073034
I n f o r ma t i o n P r o v i d e d b y :
Back-up light
Back-up
Follow the steps 1 to 3 from the pre-
vious page.
4.Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
Back-up
OPS073032
OPS073045