Table of Contents

Advertisement

Available languages

Available languages

Fill tank with fuel.
-
Starting
1) Open fuel valve ( I ).
2) Move choke lever to the "CLOSE"
position. (When the engine was
working just before don't use this)
3) Close throttle ( F ).
4) Turn the engine switch
to the "ON" position.
5) Pull the starter rope to start the engine.
6) Move choke lever to the "OPEN" position.
7) When the engine runs open the throttle ( F ) completely.
To warm a "cold" engine run the machine in low throttle ( F ) for a full
minute.
1) Use the guiding handle ( G ) to operate the machine.
2) Be sure that the shoe is parallel with the ground.
3) Do not fight or overpower the machine.
1) Turn the gas throttle ( F ) to "CLOSE".
2) Turn the engine switch to the "OFF" position.
3) Close the fuel valve ( I ).

Operating

Before starting
While operating
To stop
11

Advertisement

Table of Contents
loading

Table of Contents