Motion Picture; Recording Motion Pictures - Panasonic Lumix DMC-LX100 Basic Operating Instructions Manual

Recording motion pictures

You can record full high-definition quality images that comply with the AVCHD
standard, as well as motion pictures recorded in MP4. You can also record a 4K
motion picture in MP4. (→40)
Audio is recorded in stereo.
You can record motion pictures by manually setting the aperture value and
shutter speed. (→28)
The camera automatically sets the aperture value and shutter speed and
identifies the optimal scene to record motion pictures in [Intelligent Auto] Mode.
(→26)
1
Press the motion picture button to start
recording
• Immediately release the motion picture button after
pressing it.
• While you are recording motion pictures, the
recording status indicator (red) will flash.
• Do not block the microphones when recording
motion pictures.
• You can also use zoom while recording motion
pictures.
– The operating sounds of the zoom lever or
control ring may be recorded in some cases.
• If you press the shutter button down fully, you can
take still pictures while recording motion pictures.
2
Press the motion picture button again to end recording
●
If Extra optical zoom is used before pressing the motion picture button, these
settings will be cleared, and the recordable area will be changed significantly.

Motion picture

Motion picture
Recording state
indicator
Elapsed
recording time
Remaining recording
time (approx.)
SQT0375 (ENG)
37