Table of Contents
Advertisement
19. Put A-cover into the hook of B-cover and press it.
21. Use tweezes to clip main lens film and stick it on the
B-cover.
23. Use tweezers to clip Headset Jack and put it into
cavity of D-cover.
Page 19 (21)
Confidential
Copyright © 2008 NOKIA. All rights reserved.
Service Manual Level 1&2
20. Use a TORX T5 screwdriver to assemble two screws
(T1.6x2.6). When using torque driver, set torque to 10Ncm
@ 450 rpm. The tolerance is +/-2Ncm.
22. Use tweezers to clip Speaker module and put it into
cavity of D-cover.
24. Take a keymat and let it assembly in C-cover form Left
side
2608 RM-376
Issue 1
Advertisement
Table of Contents
