Paper throat Paper throat CD/DVD/FD/CARD throat Auto-start sensor Door interlock switch Door interlock switch Casters Bin-full sensor Bin stopper Waste bag Indicator Door open Waste bin Cool down Media tray Bin-full Paper jam Rear of machine Switch panel Forward button Cable socket Power ON/OFF button...
Initial Setup After unpacking the product, place the shredder head securely on the top of the cabinet. Beware of fingers. Risk of injury! Front door Pull out the waste bin in the cabinet, put a waste bag over and folded outward. CD and Credit Card Shredding A separate media tray is provided to collect the shredded CD and credit cards shards.
Continuous Introduction Thank you for choosing this shredder from GBC. We are sure it will serve you well, but please take a little time to read these instructions to ensure you get the best out of your machine. Safety First...
Operation Bin Full Connect shredder to mains supply. The shredder will not function when the bin is full and the bin full indicator will illuminate. Please empty the bin. Check that the ON/OFF switch(18) at the back of the machine is switched to the ‘ON’ position. Open either the left door or the front door and pull out the waste bin.
Option 2: Lubricate the shredder using the shredder oil Stack some A4 paper (2-3 sheets thick) on top of the Only use GBC Oil* (1760049) to lubricate. Apply paper that oil was applied. shredder oil to one side of paper (2-3 sheets thick) in a wide zigzag pattern across the page to ensure sufficient coverage.
We recommend these machines are serviced every 6 to 12 safety when other types or brands of lubricants are used on months by a GBC service engineer - see back of this booklet any part(s) of this machine. for the contact details of our service centre and for enquiries about maintenance contracts.