Troubleshooting - TP-Link TL-WPS510U Hardware Installation

How can I reset the Print Server?
If you lose the connection with TL-WPS510U because of wrong configuration, you
need to reset it to factory defaults and configure it again.
Follow the steps below to reset TL-WPS510U:
1. Unplug the power adapter of TL-WPS510U;
2. Press and hold the Reset button on TL-WPS510U;
3. Plug in the power adapter of TL-WPS510U and continue pressing the Reset
button for about 10 seconds.
4. Release the Reset button and wait for the WLAN LED (green) to flash.
5. When the WLAN LED light flashes regularly, the resetting is completed and you
can see the WLAN-PS Ad-Hoc network in your wireless network list.

Troubleshooting

9