TP-Link TD-W8961NB Installation Manual page 17

D. Configuration for Bridge Mode
This page will then display.
Enter the Bridge information
provided by your ISP
Click NEXT
A fter completing the above configuration, please proceed to
Settings Configuration
Wireless Settings Configuration
This page will then display.
Keep the default setting: Activated.
If you want to disable Access Point,
please select Deactivated
Create a unique and easy to remember
name for your wireless network. You
can also keep default settings without
the device being affected
Select an Authentication Type
Select an Encryption type
Enter a Security Key using
8-64 characters
Click NEXT
The wireless security is Disabled by default. You are suggested to select
Note
an Authentication Type for security settings. WPA2-PSK is recommended.
A fter completing the above configuration, please proceed to
Complete.
17
Wireless
Quick Start