Changing Horn Directivity Angle - Toa ES-5071-95 Operating Instructions Manual

10. CHANGING HORN DIRECTIVITY ANGLE

Mid-range and high-range horns can be rotated in 90 ° steps. Use this function when switching from horizontal
to vertical installation or when lining up two speakers symmetrically. Follow the procedures below to rotate the
horns.
1. Remove all 14 screws (M5x10) holding the front
grille in place, and detach the grille.
2. Remove all 8 screws (M5x40) holding the horn
baffle in place, and detach the horns.
3. Remove all 8 screws (M5x40) holding the unit baffle,
and rotate the unit baffle to the desired angle. (The
unit baffle can be rotated without taking it out of the
enclosure.) It is possible to rotate the unit baffle in
90° steps.
4. Retighten the 8 unit baffle mounting screws.
5. Replace the horns, and retighten the 8 horn baffle
mounting screws.
6. Replace the front grille, and retighten the 14
mounting screws.
10