Operations In Live View Mode; Front Panel Operation On Live View - HIKVISION DS-96NI-ST User Manual

Network video recorder
Hide thumbs Also See for DS-96NI-ST:
Table of Contents

Advertisement

3.2 Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.
Single Screen: showing only one screen on the monitor.
Multi-screen: showing multiple screens on the monitor simultaneously.
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen on
the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
Start Recording: continuous record and motion detection record are supported.
Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
Add IP Camera: the shortcut to the IP camera management interface.
Playback: playback the recorded videos for current day.
Aux Monitor: the NVR checks the connection of the output interfaces to define the main and auxiliary output
interfaces. The priority level for the main and aux output is HDMI1/VGA1> HDMI2/VGA2 (for
DS-9600NI-I8) and HDMI > VGA (for DS-7600NI-I2 and DS-7700NI-I4).
DS-9600NI-I8: When the HDMI1, HDMI2, VGA1 and VGA2 are all connected, the HDMI1/VGA1 is used as
main output and the HDMI2/VGA2 is used as the aux output.
DS-7600NI-I2 and DS-7700NI-I4: When both the HDMI and VGA are connected, the HDMI is used as main
output and the VGA is used as the aux output.
When the aux output is enabled, the main output cannot perform any operation, and you can do some basic
operation on the live view mode for the Aux output.

3.2.1 Front Panel Operation on Live View

Functions
Common Menu
Menu
Show single screen
Show multi-screen
Manually switch screens
Auto-switch
Playback
Switch between main
and aux output
User Manual of Network Video Recorder
Table 3. 2 Front Panel Operation in Live View
Front Panel Operation
Quick access to the sub-menus which you frequently visit. Up to 5 sub-menu
options are supported.
Enter the main menu of the system by right clicking the mouse.
Press the corresponding Alphanumeric button. E.g. Press 2 to display only the
screen for channel 2.
Press the PREV/FOCUS- button.
Next screen: right/down direction button.
Previous screen: left/up direction button.
Press Enter button.
Press Play button.
Press Main/Aux button.
48

Advertisement

Table of Contents
loading

Table of Contents