Configuring Ntp Server - HIKVISION DS-96NI-ST User Manual

refer to Chapter 9.2.11 for the mapped HTTP port No.
 OPTION 2: Access the devices via iVMS4200
For iVMS-4200, in the Add Device window, select
information.
Nickname: Edit a name for the device as you want.
Server Address: www.hik-online.com
Device Domain Name: It refers to the Device Domain Name on the device or the Device Name
on the HiDDNS server you created.
User Name: Enter the user name of the device.
Password: Enter the password of the device.
12. Click the Apply button to save and exit the interface.

11.2.4 Configuring NTP Server

Purpose:
A Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of system
date/time.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the NTP tab to enter the NTP Settings interface, as shown in Figure 11. 14.
3. Check the Enable NTP checkbox to enable this feature.
4. Configure the following NTP settings:
•
Interval: Time interval between the two synchronizing actions with NTP server. The unit is minute.
•
NTP Server: IP address of NTP server.
User Manual of Network Video Recorder
Figure 11. 13 Access Device via iVMS4200
Figure 11. 14 NTP Settings Interface
163
and then edit the device