Related Manuals for Helipal Storm Drone 4 v3
Summary of Contents for Helipal Storm Drone 4 v3
- Page 1 Storm Drone 4 v3 with CC3D Flight Controller USER MANUAL V1.0 Copyright@2015 HeliPal.com. All Rights Reserved...
- Page 2 6) Never overcharge LiPo batteries. Do not charge above 4.2V per cell. When the battery is fully charged, disconnect it from the charger. Never leave the battery charger unattended during charging. 7) Never discharge batteries to below 3.3V per cell 8) Remove batteries when not using the drone. Copyright@2015 HeliPal.com. All Rights Reserved...
-
Page 3: Package Includes
5. 6pcs Counter-Clockwise Blade Propeller (4 of them are spare parts) 6. SKYRC E3 Battery Charger 7. 2.0 mm Hex Wrench 8. 10mm Hex Nut Driver Driver (for motor cap) 9. Battery Anti-Slip Mat 10. Battery Strap X 2 11. Battery Voltage Display Copyright@2015 HeliPal.com. All Rights Reserved... -
Page 4: Quick Start
Quick Start Copyright@2015 HeliPal.com. All Rights Reserved... - Page 5 Copyright@2015 HeliPal.com. All Rights Reserved...
- Page 6 Control Copyright@2015 HeliPal.com. All Rights Reserved...
-
Page 7: Circuit Diagram
Circuit Diagram Copyright@2015 HeliPal.com. All Rights Reserved... - Page 8 Use the small screwdrivers to press and hold the switch inside the receiver until it is flashing with light in Blue and Purple, Switch on the radio controller, it will start searching for available receiver. Receiver will stop flashing while the bind process complete and the radio controller will the signal strength on the screen Copyright@2015 HeliPal.com. All Rights Reserved...
- Page 9 [1][RESET] [1] = SwH (Using Switch H to responsible for the reset timer action) [1][RESET] [2] = DOWN (Using Switch H’s down action to reset the timer) Copyright@2015 HeliPal.com. All Rights Reserved...
Need help?
Do you have a question about the Storm Drone 4 v3 and is the answer not in the manual?
Questions and answers