Advertisement
Start-up
6
4. Install the camera insert.
5. Place the bottom section of the TX_44 cover frame in place
and attach the camera top unit and the central inserts of the
outdoor station to the flush-mounted inserts.
6. Set the camera lens in the desired direction
(see "Setting range of coverage", Page 8).
7. Remove the protective film on the lens.
8. Attach the camera cover.
9. Clip on the frame top section and press in the Torx screws.
i
Measures for theft protection
To protect the outdoor station from theft, you can secure the
bottom section of the TX_44 frame to the wall with screws and
screw plugs.
Instead of using Torx screws, you can also use the optional Tri-
Wing screws to secure the top section of the frame.
Once you have installed all of the devices (outdoor and home
stations, video control unit etc.), you can start up the door com-
munication system.
Start-up is described in the system manual included with the
video control unit.
Advertisement
