Operating The Blisslights Spright Smart; Using The Timer - lissLights Spright smart User Manual

OPERATING THE BLISSLIGHTS SPRIGHT SMART

The BlissLights Spright Smart operates in temperatures of -15°F to 90°F (-26°C to 32°C).
There may be a slight delay if operating in temperatures below 55°F (13°C). Please allow up
to 10 minutes for light to warm up and reach its full projection potential at temperatures
at or below 55°F (13°C).

USING THE TIMER

The BlissLights Spright Smart will function with or without the timer. The timer that
is provided is a 6-18 timer. With this timer, BlissLights Spright Smart will stay on for 6 hours,
For example, the consumer may want to initially plug in their BlissLights Spright Smart and
timer at 8 PM. The BlissLights Spright Smart will turn on every night at 8 PM, run for 6
hours, then shut o for 18 hours.
To use the timer, the transformer must be plugged into a standard 110V wall outlet, the
two-prong connector on the timer is then connected into the transformer, and the 2-prong
connector on the BlissLights Spright Smart is then inserted into the timer.
To change the time the BlissLights Spright Smart turns on, simply unplug the transformer
and timer combination from the wall, then plug it back in at the desired start time.
To operate the Blisslights Spright Smart manually without the timer, plug the two-prong
connector on the BlissLights Spright Smart directly into the transformer.
Screw the cap on to complete the water tight seal. Next plug the standard 3-prong plug
on the other end of the transformer into an outdoor/indoor outlet. To turn o , unplug the
transformer from the wall.
1 foot
3 feet of coverage for every 1 foot of throw
4
3 feet