Notice - lissLights Spright smart User Manual

NOTICE

CAUTION—Use of controls or adjustments or performance of procedures other than those
This laser product is certi ed as a CLASS 2 laser product to the requirements of the US
Federal Laser Product Performance Standard (FLPPS) contained in the regulations in 21 CFR
Subchapter J. CLASS 2 laser products can be hazardous when directly viewed.
Avoid direct viewing of a CLASS 2 laser energy. For reference the FLPPS requirements
for demonstration laser products like laser pointers are limited to CLASS 2 levels of laser
accidental viewing at a relatively short distance from the laser aperture. As similar with all
bright light sources, when you operate this device in unsupervised general public areas, it is
recommended that up close access to the BlissLights be restricted or prevented.
This laser display device incorporates a CLASS 2 laser system which, by itself, may be
hazardous. However, this laser display device incorporates a protective housing and
human access to laser radiation during operation or maintenance above the CLASS 2 limits.
Each individual laser beam power is under 1mw which is less than a standard laser pointer.
UNDER NO CIRCUMSTANCE shall attempts be made to open the protective housing or
operate the device if the aperture windows are damaged.
All service to this laser display device requiring the protective housing to be opened and/
or removed shall be performed by BlissLights service personnel or their authorized agents
only. The opening of the BlissLights protective housing by any unauthorized individual
or agent automatically voids the manufacturer's warranty.
NO LASERS SHOULD BE POINTED INTO THE SKY WITHIN 10 NAUTICAL MILES
OF AN AIRPORT. IF YOU ARE LOCATED WITHIN THIS SPECIFIC PERIMETER, WE
RECOMMEND THE LASERS BE POINTED DOWN AT THE GROUND SO NO STRAY BEAMS
ARE PROJECTED INTO THE AIR. CHECK WITH YOUR LOCAL AIRPORT OR COUNTY
GUIDELINES FOR FURTHER INFORMATION.
1