Figure 8 - Ssc300 With Nmea 0183 Connection Only - Maretron SSC300 User Manual

page 7, assemble the connector per the instructions packaged with the connector, and screw
®
the connector snugly into the NMEA 2000 /Power connector on the SSC300, as shown in
Figure 8 below. Please ensure that the cable has at least a 6mm diameter to ensure a
watertight seal to the Field Attachable Connector.
Figure 8 – SSC300 with NMEA 0183 Connection Only
2.4.2.2 Supported NMEA 0183 Baud Rates
The SSC300 compass supports NMEA0183 communication at both 4800 baud and 38400
baud. All SSC300 Compasses are shipped with a baud rate of 4800 baud. The baud rate may
be set to 38400 baud by connecting to the compass using a terminal emulator (See Appendix
C for details) and sending the following strings to the compass through the NMEA 0183
connection:
shell
This will cause the "cmd>" command prompt to be displayed
tm setbaud 38400
Revision 1.0 Page 9