Installation Diagram Of Indoor And Outdoor Units - Toshiba RAS-07SKSX-1 Service Manual

8-2. Installation Diagram of Indoor and Outdoor Units

5
Active Carbon-Catechin filter
Before installing the
wireless remote control
• With the remote control cover
open, load the batteries supplied
correctly, observing their
polarity.
2
Wireless remote control
3
Batteries
7
Pan head wood screw
4
Remote control holder
2
Wireless remote control
Vinyl tape
Apply after carrying
out a drainage test.
− 22 -
FILE NO. SVM-08028
For the rear left and left piping
Hook
1
Installation
plate
Insert the cushion between
the indoor unit and wall, and
tilt the indoor unit for better
operation.
Do not allow the drain hose to
get slack.
Shield pipe
Make sure to run the drain
hose sloped downward.
The auxiliary piping can be
connected to the left, rear left,
rear right, right, bottom right
or bottom left.
Right
Rear right
Insulate the refrigerant pipes
separately with insulation, not
together.
Saddle
Extension
drain hose
(Not available,
provided by
installer)
Wall
Cut the piping
hole sloped
slightly.
Left
Rear
Bottom
left
right
Bottom left
6 mm thick heat resisting
polyethylene foam