MSI P55A-G55 series Manual page 52

BIOS Setup BIOS Setup
▶ PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for reading/
writing to IDE drives.
▶ OnChip SATA Controller
This item allows users to enable or disable the SATA controller.
▶ RAID Mode
This item is used to select mode for SATA connectors.
▶ I/O Devices
Press <Enter> to enter the sub-menu and the following screen appears:
▶ COM Port 1
Select an address and corresponding interrupt for the serial port.
▶ Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides Stan-
dard, ECP, and EPP features. It has the following options:
[Disabled]
[3BC]
[278]
[378]
▶ Parallel Port Mode
[Normal]
[EPP]
[ECP]
[ECP + EPP]
[Bi-Directional]
To operate the onboard parallel port as Standard Parallel Port only, choose [Nor-
mal]. To operate the onboard parallel port in the EPP mode simultaneously, choose
[EPP]. By choosing [ECP], the onboard parallel port will operate in ECP mode only.
Choosing [ECP + EPP] will allow the onboard parallel port to support both the ECP
and EPP modes simultaneously.
3-12
Line Printer port 0
Line Printer port 2
Line Printer port 1
Standard Parallel Port
Enhanced Parallel Port
Extended Capability Port
Extended Capability Port + Enhanced Parallel Port