Setup Guide - Warwick LWA 500 Owner's Manual

SETUP GUIDE

1.
Unpacking – Carefully unpack unit from the carton box.
2.
Powering up – Ensure the mains power switch is in
the AC Mains socket of the amplifier to the mains power outlet. Now flip the power switch on the amplifier to the
ON position.
" "
3. Connecting speaker cabinets – Connect speaker cabinet(s) to the SPEAKER OUT using a compatible speaker cable.
This minimum recommended speaker load is 4.
4.
Connecting an instrument – Always mute the channel(s) you wish to plug in your instrument before inserting the
input jack(s). Now connect your bass(es) to the appropriate input(s) on the front panel.
5.
Adjust the input gain knob for a good signal level.
6.
Adjust EQ/Compressor settings to your liking.
7. Set the Volume knob so that the output volume is at a reasonable level.
8. Rock out!
OFF position and then connect the supplied power cord from
" "
10