Table of Contents
Advertisement
18
13. Remove your ESD wrist strap from the chassi and from your
wrist.
It would hinder your replacing the top cover, next.
14. Replace Nº32 preamp top cover and screws (
When replacing the top cover, note the guide pins at the bottom
edges as well as the top "key" you noticed before. All three must be
lined up before you slide the top cover forward, flush with the
front panel.
15. Reconnect the DC interface cables and restore power to the
Controller (if you powered it down earlier)
Congratulations! The new phono inputs will automatically ap-
pear as available input selections.
(closeup)
3
⁄
32
" hex key)
Advertisement
Table of Contents
