Advertisement
Nº433Tri p l e -Mono Power Ampl i f i e r
200 W/ch rms power @ 8 Ω
Rated power output:
400 W/ch rms power @ 4 Ω
all above power ratings from 20 Hz–20 kHz at <0.5% THD
(assuming that the AC mains can deliver adequate current, without its own voltage sagging)
Frequency response:
within 0.2 dB from 20 Hz to 20 kHz
Signal-to-noise ratio:
better than –80 dB (ref. 2.83 V)
Voltage gain:
26.8 dB
Input impedance:
100 kΩ (balanced)
50 kΩ (unbalanced)
Input sensitivity
2.83 V output: 130 mV
Full output: 1.82 V
Power consumption:
200 W in on, 100 W in standby, 10 W in sleep
Mains voltage:
Determined by the needs of the country for which the unit was manufactured;
cannot be reset by dealer or user
Connector complement:
(6) custom binding posts
(3) 3-pin XLR balanced input connectors
(3) RCA input connectors
(2) 1/8-inch mini-jacks for remote turn-on
(1) RS-232 port on RJ-11
(2) Mark Levinson communications ports on RJ-11, RJ-45
(1) IEC-standard AC receptacle
less than 0.05 Ω from 20-20,000 Hz
Output impedance:
Overall dimensions:
width:
height:
depth
Shipping weight:
130.5 lb (59.2 kg)
Net weight:
114.5 lb (51.9 kg)
Specifications are subject to change without notice.
Nº433 capacitors
17.75"
(45.1 cm)
7.65"
(19.4 cm)
19.83"
(50.4 cm)
Nº433
channel assembly
Advertisement
