Table of Contents
Advertisement
L
CPU REPLACEMENT
: IMPORTANT NOTE
When IC701 (M50439-
625SP) is replaced,it
is necessary to make the initializing of IC701 as following
procedure.
(1) Switch off the TV set.
(2) Replace IC701.
(3) Switch on the TV set.
(4) Select programme
position"1"
directly with the remote control transmitter.
(5) Press and hold the Recall key (of the remote control t ransmitter)
formore than 2 seconds, and input
SPECIAL CODE "01" using the programme
selector of the remote control transmitter.
(6) Press the MEMORY button of the remote control transmitter.
REMARKS:
If there is mistaking the procedure,
switch off the TV set and repeat steps (3) to (6).
The initializing
is now completed.
Next ,operate the pre - setting of stations to allocate the TV channels.
Refer to the instruction manual for this TV set.
—9—
Advertisement
Table of Contents
