Toshiba 56HM195 Service Manual page 6

7.
VERSION CHECK MODE
1) Press "9" button twice on Remote Control during display of adjustment menu in the service mode. The version of main
MPU will begin to check.
2) During Version Check, the following displays are shown.
1
2
3
4
5
6
7
8
MAIN MPU :
1
Version information of microprocessor
In case of file name : HM195, Version 1401 for Code Program Version
and (U15) for OSD Version indicates [HM195_1401(U15)]
EEPROM :
2
Version information of EEPROM : Display 1 byte data.
3 SUB MPU :
Version information of SUB MPU : Display 1 byte data.
OPTION :
4
Option information : Display six numbers of 1 byte data.
5 HDMI ID :
HDMI ID information : Display 4 byte data.
6 DMD :
Version information of DMD optical engine : Display 1 byte data.
MALIBU :
7
MALIBU information : Display two numbers of 1 byte data.
8 MALIBU STATUS :
MALIBU STATUS information : Display four numbers of 1 byte data.
- 6 -