Connecting The Gps100; Figure 3 - Gps100 Interface Connector; Figure 4 - Nmea 2000 ® Connector Face Views - Maretron GPS100 User Manual

GPS100 User's Manual

2.4 Connecting the GPS100

®
The Maretron GPS100 provides a connection to an NMEA 2000 interface through a
connector that can be found on the bottom of the device (see Figure 3).
®
NMEA 2000 Connector
Figure 3 – GPS100 Interface Connector
®
The NMEA 2000 connector is a five pin male connector (see Figure 4). You connect the
® ®
GPS100 to an NMEA 2000 network using a Maretron NMEA 2000 cable (or compatible
cable) by connecting the female end of the cable to the GPS100 (note the key on the male
connector and keyway on the female connector). Be sure the cable is connected securely and
that the collar on the cable connector is tightened firmly. Connect the other end of the cable
®
(male) to the NMEA 2000 network in the same manner. The GPS100 is designed such that
®
you can plug or unplug it from an NMEA 2000 network while the power to the network is
®
connected or disconnected. Please follow recommended practices for installing NMEA 2000
network products.
®
Figure 4 – NMEA 2000 Connector Face Views
Page 4 Revision 1.2