Mounting The Gps100 To A Standard Marine Pole Mount; Figure 2 - Mounting The Gps100 To A Standard Marine Pole Mount - Maretron GPS100 User Manual

® ®

2.3.2 Mounting the GPS100 to a Standard Marine Pole Mount

Screw the included GPS100 antenna mount base to the standard marine mount. Thread the
®
NMEA 2000 cable through the standard marine mount and the antenna mount base from the
bottom out through the top and connect it to the GPS100 unit (see Section 2.4 below). Finally,
attach the GPS100 to the antenna mount base using the included brass mounting screws and
lock washers as shown in Figure 2.
Figure 2 – Mounting the GPS100 to a Standard Marine Pole Mount
Revision 1.2 Page 3